Networking & wireless control

BACK TO MAIN RENTALS PAGE.

 
 

wdmx f1 wireless dmx transceiver

The W-DMX BlackBox FLEX-1 G4 Transceiver is perfect as a single universe, highly flexible solution for W-DMX support in our indoor range. The unit supports both transmit and receive modes of both DMX and RDM signals, and support for both 2.4GHz and 5.8GHz frequency bands, giving access to more channels and hence greater reliability. With the optional Ethernet protocol support, the product can support any protocol in, be it Art-Net, sACN or ETC Net, and any protocol out, Ethernet or RS-485.

 

WDMX f2 dual band wireless dmx transceiver

The W-DMX BlackBox FLEX-2 G4 Transceiver is the top-of the-line, highly flexible W-DMX BlackBox unit. With the capability to both transmit and receive DMX and RDM signals wirelessly, as well as ‘bounce’ them around corners in repeater mode (as an option), flexibility underpins this product. With Ethernet in/out options, along with Dual-Band and AFHSS support, reliabity and ease of use is greatly increased.

 

wdmx r512 wireless dmx receiver

The W-DMX BlackBox R-512 G4 Receiver is the perfect receiver-only solution for the W-DMX system, wherever you need to have a DMX or RDM output to your fixtures (RDM available as an option). With support for Dual-band 2.45GHz and 5.8GHz technology, and support for AFHSS to dynamically avoid other radio users, reliabity is increased tremendously With the optional Ethernet protocol support, the product can output ArtNet and sACN along with standard RS-485 signals.

 

Lumen radio dmx transmitter

CRMX Nova TX is a DMX transmitter for one DMX universe of up to 512 channels at maximum refresh rate. Multiple CRMX TX units can be used together to transmit multiple DMX universes, allowing for easy system expansion.

 

fleenor DMX OPTO ISOLATED SPLITTERS

The DMX512 Isolated Splitter / Amplifier is available in three standard configurations: three, five, or eleven outputs from a single DMX input. An enhanced five output splitter with protection from miswiring and lightning, and a universal power supply is also available. Units with any number of inputs and outputs may be manufactured on a custom basis.

Each output is electrically isolated from the input, and every other output, by 2500 volt optical couplers. Each output has its own line driver and associated power supply.

Available connector types: 5 pin XLR, 3 pin XLR, terminal block, RJ-45 (ESTA or Color Kinetics pinout), or mounted in a JBOX enclosure. (JBOX mounted splitters are not listed with UL or ETL)
123 and 125 splitters: DIN rail mount option with terminal blocks, 5 pin XLR with feed-thru, or 3 pin XLR with feed-thru.

 

High End DMX Processor DP8000 (DP8K)

The DMX Processor 8000 (DP8K) adds additional DMX processing capabilities to the Hog 4 line and provides the output power for Hog 4 systems. The Hog 4 Operating System doesn't limit operators to a fixed number of DMX channels - just add as many DP8K’s as needed to supply the specified number of DMX universes for the production. The DP8K manages 16 DMX universes with ease, providing standard DMX, Art-Net, and E1.3.1 (sACN) outputs.

 
 

PATHWAY PATHPORT OCTO

The Pathport Octo™ is an eight-port rackmountable gateway, providing compact installation for any size system. The Octo also provides a simple, straightforward replacement option for Pathfinder™ matrix switching systems.

The Pathport OCTO provides all the features and flexibility that Pathports are renowned for, at our lowest cost-per-port ever. 

Status LEDs provide instant confirmation of port direction and activity.  The LCD display and encoder knob allow for front panel configuration and reporting of the most commonly used features, such as IP address and subnet mask, port direction and protocol selection.  Different Ethernet protocols may even be merged together or prioritized.  Advanced features include crossfade between DMX sources, DMX output speed and signal loss behavior. Multiple connector options available, including adaptor kits to convert terminal strips to IDC connections.

 

pathway network node, single port

Designed specifically for the tour and rental markets, the rugged, truss-mountable Touring Edition is fully configurable without need of a computer or a network connection.

 

pathport quattro 4p

Power-over-Ethernet operation makes the Pathport Quattro ideal for truss-mounted locations, while silent, fanless operation allows it to be placed immediately next to the lighting console, no matter where the console must be located.

 
OPTO-BRANCH-8.jpg

ELATION OPTO BRANCH 8

The OPTO BRANCH 8™ is a 19” single rack space, 8-way DMX distributor/booster with 5-pin XLR input and output jacks. This unit takes the incoming DMX signal and splits it to eight (8) separate outputs, each providing a total electrical isolation of up to 1000V between different branches in a daisy chain group. This greatly decreases problems with ground loops and efficiently buffers and magnifies the DMX signal, making it more accurate and reliable. All outputs include 5-pin XLR sockets, which are electronically isolated from each other to ensure uninterrupted data. In addition, each output has dedicated drivers to boost the incoming signal and the unit includes an auto switching power supply (100-240v 50/60Hz).